Axial-racing AX90033 Manuel d'utilisateur télécharger pdf (Page 6)

Getting-Started Checklist

The following checklist is a guide for getting you vehicle running for the first time.

Read ‘Cautions’ in Manual. (Page 2)

Familiarize yourself with vehicle and

its components.

Even though the vehicle is new check

driveshaft setscrews and other screws to

make sure they are tight from the factory.

Charge battery pack. (Page 4)

Install 4X AA batteries into Transmitter.

(Page 7)

Install battery pack in vehicle. (Page 4)

Turn on transmitter FIRST then ESC.

(Page 4)

Check to make sure steering and throttle

operation work correctly. (Page 7)

Range check radio system. (Next Page)

Drive vehicle, challenge yourself and

have fun!

Maintain vehicle. (Next Page)

KEEP CHASSIS FREE OF DIRT

OR DEBRIS

CHECK FOR LOOSE SCREWS

ON CHASSIS ESPECIALLY

THE KNUCKLE, C-HUB AND

AXLE LOCKOUT SCREWS

CHECK FOR WEAR ON

THE BALL JOINTS IN THE

STEERING AND SUSPENSION

LINKS

(REPLACE IF NECESSARY)

CHECK DRIVESHAFT SET

SCREWS ON BOTH ENDS

AND APPLY THREAD

LOCK IF NECESSARY

CHECK WHEEL NUTS MAKING

SURE THEY’RE SNUG

CHECK TIRES MAKING SURE

THE BEADS ARE STILL FIRMLY

BONDED TO THE ENTIRE

CIRCUMFERENCE OF THE RIM

REPLACE TRANSMITTER

AA’S IF THE GREEN LIGHT IS

BLINKING

INSPECT THE SPUR AND

PINION GEARS FOR DAMAGE

CHECK SLIPPER CLUTCH IF

APPLICABLE, FOR PROPER

OPERATION

(SEE PAGE 25 STEP

23 FOR SETUP INSTRUCTIONS)

CHECK DRIVELINE FOR

SMOOTH BIND-FREE

OPERATION

CHECK FOR ANY LOOSE

CONNECTIONS OR FRAYED

WIRING

INSPECT SHOCK

ABSORBERS FOR SMOOTH

DAMPENED OPERATION

CHECK RECEIVER ANTENNA

TO CONFIRM IT’S NOT

DAMAGED

REPLACE ANY NOTICEABLE

BENT OR BROKEN PARTS

Maintaining Your Vehicle

Just like a full size car or truck your RC vehicle must undergo periodic maintenance in order to ensure peak running performance. Preventative

maintenance will also help avoid needless breakages which could result in costly repairs. Below are some suggestions to properly maintain

your vehicle.

Range-Checking Your Radio System

The radio system should be checked before operating the vehicle to ensure it’s operating properly and has adequate range.

1. Turn on the transmitter first and then the vehicle.

2. Have a friend hold the vehicle while keeping hands and loose clothing away from moving parts.

Walk away until you are at the farthest distance you plan to operate the vehicle.

4. Steer the vehicle back and forth and throttle both forward and reverse making sure there is no erratic behavior.

5. If any erratic behavior is exhibited do not operate the vehicle, call customer service for further assistance.

RANGE-CHECKING FOR DISTANCE

Check driveshaft setscrews on both ends and apply thread lock if necessary.

CHECK STEERING

OPERATION FOR ANY BINDS

(2802751)AX90033使用說明書_完稿.indd 6 2013/9/13 上午 09:48:22

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Axial-racing AX90033 Manuel d'utilisateur Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Axial-racing AX90033